Home    »    Producten
Back to overview Permacol 2163

Permacol® 2163 is a thin, not filled, 2-component epoxy casting resin which is solvent free. The 2163 is used to cast electrical connections and components, as protective layer for print boards or as dip material. This thin casting resin is used as an injection resin also, due to its excellent adhesion to metals, wood, glass and several rigid plastics.

The 2163 cures at room temperature. Complete curing is possible at + 10°C. It is possible to colour this casting resin while properties are kept.

Technical data

Mixing ratio A : B : 100 : 50 (weight/volume)
Pot life : approx. 30min (100gr at 25°C)
Gel time : approx. 90min (at 20°C)
Curing time : approx. 24hrs (at 20°C)
Colour of mixed product: transparent, yellowish
Viscosity mixture : 400 mPa·sec at 23°C
Hardnes : 80 °Shore D

  • Cold curing
  • Low viscosity
Download Download PDF
Permacol 2177

Permacol® 2177 is a 2-component epoxy casting resin which is used to cast electrical connections and components, as protective layer on plastics or as dip material. This casting resin can be poured, is applicable in thin layers and usable in dosage installations.

2177 epoxy casting resin cure at room temperature. The 2177 is a neutral casting resin and therefore available in many different colours. This casting resin is especially suited to cast electronics, this product is electrically isolating. Due to its tough elastic properties Permacol® 2177 A/B is able to absorb differences of expanding, but at the same time sufficiently form settling, as it is a filled system.

Technical data

Mixing ratio A : B : 100 : 15 (weight)
Pot life : 2hrs at room temperature
Curing time : approx. 24hrs
Complete curing : approx. 24hrs
Colour of mixed product: black
Viscosity mixture : 1.400 mPa·sec at 23°C
Hardness : 95 °Shore A, 45 - 50°Shore D
Temperature resistance: -30°C till +130°C continuous

  • Tough elastic
  • Suitable for casting of electronics
  • Good chemical resistance to water, thin acids, bases and oil
Download Download PDF
Permacol 2520

Permacol® 2520 is a 2-component epoxy casting resin, free of solvents, with excellent heat conductivity.
This casting resin is used to cast electrical circuits and components, where heat is an issue. This casting resin bonds excellent to metals, wood, glass, en several rigid plastics.

The 2520 is cold curing, therefore complete curing takes place at room temperature.

Technical data
Mixing ratio A : B : 100 : 30
Viscosity A-comp : 15.000 mPa.s
Viscosity B-comp : 650 mPa.s
Viscosity of the mixture : 2.000 – 3.000 mPa.s
Pot life at 23°C : ca. 30min
Curing time at 23°C : ca.24 h
Heat conductivity coefficient :> 1 W.m.K
Volume resistivity : > 10E14 Ω.cm
Temp resistivity : -30 to 140°C
Hardness : 85°D Shore
Density A-comp. : 2,00 g/cm3
Density B-comp. : 1,46 g/cm3

  • Heat conductive
  • Electrical insulating
  • Curing at room temperature
  • Low viscosity
Download Download PDF