
Permacol® 2230 is a fast curing 2-component adhesive which is yellow, flexible, gap filling and excellent resistance to shocks. This product is applicable to a large diversity of materials, such as metals, ceramics, glass, stone, wood, rigid plastics and such like.
The 2230 cures at room temperature, so full curing takes place at 20°C. To obtain best results, it is possible to warm up the joint to 80°C for 30 minutes.
Technical data
Mixing ratio : A : B = 1 : 1 (volume)
Pot life : 5-10 min / 20°C
Curing time : 15 min / 20°C
Curing completed after : approx. 12-24 hrs / 20°C or 30min / 80°C
Pressure : 0,5 - 2kg/cm²
Colour : yellow
Application : 100 – 200g/m² depending on roughness of the surface
Hardness : 50 Shore °D
Viscosity A-component : 3.500 mPa.s/23°C (resin)
Viscosity B-component : 150.000 mPa.s/23°C (hardener)
Viscosity mixed : 20.000 mPa.s/23°C
Temperature resistance : -30°C up to +130°C
Elongation : approx. 135%
- Flexible, soft material
- High impact resistant
- Water resistant
- Resistant to oil, grease and acids
- Gap filling
